HPLC Valves
Waters Corp Waters Solenoid Diverter Valve, 100 psi, 3-Way, 2-Position
This kit includes a solenoid diverter valve designed for fluidic control in analytical instrumentation. It provides precise control for fluidic pathways and is rated for 100 psi.
- Solenoid diverter valve
- 2-position, 3-way configuration
- Rated for 100 psi
- Includes ETFE tubing for flow rate selections
- Includes cable ties for securing tubing
- Designed for connection to a second fraction collector
Grainger Actuated Ball Valve 2 In 316 SS
The Pneumatically Actuated Two-Way Ball Valve by ASCO is a 1/4 inch NPT brass body valve with a stainless steel ball and stem. It has a maximum pressure rating of 150 psi and temperature rating of -20 to 180 degrees Fahrenheit. This normally closed valve shifts positions when pressure is applied to the air pilot section. It can be used for on/off and diverting applications with air, water, oil and inert gas. The valve shifts positions in less than 50 milliseconds.
Waters Corp Waters Switching Valve, Two-Position, Six-Port, Stainless Steel
This switching valve automates multiple injector and switching tasks, eliminating manual operation. It is designed for high throughput sample preparation and analysis, offering unattended operation and compatibility with various systems.
- Eliminates manual switching valves.
- Automates multiple injector and switching tasks.
- Saves time with unattended operation.
- Accelerates high throughput sample preparation and analysis.
- Ready-to-use and compatible with any system.
- Valve positions indicated by digital display or remote selection.
- Built-in electronic communications for broad compatibility.
Trajan Scientific VICI Valco Sample Loop, 20-L, Cheminert, Stainless Steel, Loop With 1/16"" Tube Ends Includes Two Stainless Steel Nuts and Ferrules
VICI Valco Sample Loop, 20-¿L, Cheminert, Stainless Steel, SS Loop With 1/16" Tube Ends - Includes Two SS Nuts and Ferrules. Made in the USA.
Analytical Sales & Services 100µL PEEK Valco Sample Loop with End Fittings For W-Type Valves
This item has a minimum order quantity of 2 per supplier requirements. 1005L PEEK SAMPLE LOOP
Sigma Aldrich Fine Chemicals Biosciences AldrichR check-valve bubbl1EA
Check-valve ball prevents oil from being drawn into the system. Order replacement SafetyBarb hose connectors Z547786 (straight) or Z547883 (angled).
Sigma Aldrich Fine Chemicals Biosciences AldrichR check-valve bubbl1EA
filling Position the bubbler on its side with the left hose barb (as shown in the drawing) pointing straight up then pipette 15 mL of oil through the hose barb into the bubbler reservoir. Position bubbler vertically as shown in drawing and it is ready to use. Principal of operation Gas enters the bubbler from the hose barb on the right and flows through the bubbler exiting at the left. The gas pressure unseats the check-valve ball to release the pressure bubbling up through the oil and out the left side. The check-valve ball reseats itself when pressure is neutralized. The advantage of a check-valve over bubbler such as Z223719 which does not have one is that it prevents oil from being drawn from the bubbler reservoir into the reaction if a sudden negative pressure occurs.
Shockwatch Div Mri MaxiLog-PDF V3
A single-use, 90-day temperature data logger with USB connectivity and PDF reports.•-30°C to 70°C / -22°F to 158°F•±0.3°C / ±0.54°F •0.1°C temperature resolution•14K Memory •1-year operating life•94 mm x 20 mm x 7 mm / 3.7” x 0.8” x 0.27”•0.37 oz / 10g•1 year warranty•CR2032 Lithium coin cell •10 per box
THERMO SCI 3P AIG PARTS & ACCESSORIES KIT REBUILD VLV 10-PORT 6K
501346028 KIT REBUILD VLV 10-PORT 6K
THERMO SCI 3P AIG PARTS & ACCESSORIES LOW PRESSURE FLOW LINE VALVE
NC1932308 LOW PRESSURE FLOW LINE VALVE